PETROBOND Casting Sand Size:5kg spray or dip

spray or dip

For furnace tools and all refractories the best results are achieved by heating the surface to a maximum temperature of 100°C

Care should be taken to discard any burnt sand close to the casting

Power generation (HRSG duct insulation)

Automotive exhaust heat shields

PETROBOND Casting Sand Size:5kg spray or dipA MeltCraft Australia manufactured product. PETROBOND is the most user friendly of all casting sands available and can achieve a near diecast finish on cast surfaces. No initial preparation needed. Compatible with all non ferrous alloys. PETROBOND can be used repeatedly without adding or mixing for many cycles. Care should be taken to discard any burnt sand close to the casting. It is recommended to only open moulds after adequate time as to allow the