MX5 NC RX8 Adjustable Front Upper Camber Arm Set (2x Non-Handed) Anti-lag For a non-adjustable version of

For a non-adjustable version of this bush please use PFF5-4001BLK

All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be required for the Storm/Fury/Xtreme)

Inside Diameter: 2

The following vehicles are likely to be compatible with the ECU

Closed loop Stepper Control & Rotary Oil Pump Control

MX5 NC RX8 Adjustable Front Upper Camber Arm Set (2x Non-Handed) Anti-lag For a non-adjustable version ofFeatures: Adjustable from factory length to +40mm. Fit all NC & RX8 models direct bolt on to stock knuckle. Additional camber adjustment via the sliding ball joint. Chassis rail clearance to cater for lowered cars avoiding damage to control arm chassis. The narrow shape gives additional wheel clearance (for cars with increased steering angle) over other upper arms available. No trimming of chassis or bodywork required. Use OEM fitment bushes Add